Home Performance Kits Crate Engines New Products How it Works Installers Distributors Contact Us History FAQ Links
What is NPS?
What is NPS about?
CHRYSLER
Small Block
Big Block
Slant 6
Hemi 6

GM
Small Block
Big Block
6 cylinder

FORD
Small Block
Big Block
6 cylinder


Performance Improvements
Power Upgrade Kit
Technical Assistance
Technical Manual
Guarantee
Limited Warranty
Liability Disclaimer
 
 
 
 
 
 

Coolant Flow Restrictor

Circulates water slowly to keep water temperature below 50°C (122°F) with hot air induction

Negative Supercharging coolant flow restrictor has a 38mm (1.5") OD with a small tapered hole to circulate the water through the cooling system at a low flow rate of 23 L/min (5 gpm) from idle to peak rpm. This allows the radiator more time to cool the water which keeps the water temperature below 50°C (122°F) when used in conjunction with the parts of the Negative Supercharging Cooling System

The coolant flow restrictor is made from brass for longevity, should be inserted into the top radiator hose and secured with the hose clamp supplied.

DO NOT use any thermostat with the Negative Supercharging coolant flow restrictor.

Impulse Engine Technology P/L

PO Box 986 Randwick NSW 2031 Australia
Ph: (02) 9398 5544
Fax: (02) 9398 5644

International: Ph: +(612) 9398 5544
Fax: +(612) 9398 5644

Email Us


Inventor of Negative Pressure Supercharging

© Copyright 1996-2015 Impulse Engine Technology Pty Ltd. All Rights Reserved.  

Website Hosting & Maintenance : WebStart